Primer Concentrate Aquastop Prof 0.5L

Name: Primer Concentrate Aquastop Prof 0.5L
Brand: Eskaro
SKU: 209676
Price: 5.39 EUR
Availability: InStock

Primer concentrate for modifying building mixtures, priming concrete floors and porous surfaces for interior use.Properties:<ul><li>Maximum VOC content in product <30 g/l</li><li>Color - light pink, transparent after drying</li><li>Consumption depending on surface absorption capacity<ul><li>For surfaces with low absorption capacity (stone, plasterboard, etc.) 10 m²/l</li><li>For surfaces with medium absorption capacity (plaster, concrete, bricks, fibreboard and chipboard, etc.) 6 - 8 m²/l</li><li>For highly absorbent surfaces (aerated concrete, etc.) 3 - 4 m²/l</li></ul></li><li>Package volume 0.5 l</li></ul>When priming:<ul><li>Use only in diluted form</li><li>Thanks to the high dry matter content, it retains all properties even at the highest permissible dilution percentage</li><li>One coat is sufficient</li><li>Strengthens the surface thanks to good absorption</li><li>Equalizes the surface absorption capacity, provides excellent adhesion with finishing materials, creating a uniform absorption surface for painting or wallpapering</li><li>Reduces paint consumption</li><li>Increases surface durability, binds dust effectively</li><li>Suitable for priming concrete floors</li><li>Almost odorless</li></ul>When adding to building mixtures:<ul><li>When adding to a mixture, the concentrate must first be diluted with the water used for preparing the mixture</li><li>Alkali resistant - does not coagulate when added to a solution and applied to fresh concrete</li><li>Improves cement carbonation in the mixture</li><li>Binds and strengthens building mixtures</li><li>The mixture becomes more plastic, does not delaminate when applied</li><li>Reduces moisture absorption of dried concrete</li><li>Reduces dust formation and increases wear resistance</li><li>Increases surface resistance to fuels and oils</li></ul>Suitable surfaces:<ul><li>Concrete</li><li>Aerated concrete</li><li>Plaster</li><li>Putties</li><li>Cement</li><li>Bricks</li><li>Plasterboard</li><li>Fibreboard</li><li>Chipboard</li></ul>Usage:The surface to be treated must be dry, free from dust, grease and other dirt and loose elements. Previously painted surfaces should be cleaned of old peeling paint and rinsed with water. Surfaces covered with mold or moss must be mechanically cleaned and treated with Biotol E or Biotol Spray, rinsed with water and allowed to dry. Puttied and plastered surfaces must be completely dry before treatment.Dilute the product with water. After dilution, the resulting solution must be thoroughly mixed. Surface and air temperature during work must not be lower than +15°С or higher than +30°С. Apply to the surface with a brush or roller in one coat. Highly absorbent surfaces should be primed using the "wet on wet" method until saturation. After drying, the primer must not create a glossy film on the surface.For priming, mix the product with water:<ul><li>Concrete, cement, putty, plasterboard surfaces 1:5 - 1:10</li><li>Substrate 1:3 - 1:5</li></ul>To prepare building mixtures, mix the product with water:<ul><li>Plaster 1:5 - 1:20</li><li>Cement and lime mortars with thickness 1 - 5 mm 1:5</li><li>Cement and lime mortars with thickness 5 - 20 mm 1:10</li><li>Concrete and self-leveling mixtures 1:5 - 1:10</li></ul>Working tools - brush, roller. Clean tools with soap and water.Drying time 2 - 6 hours at 20ºC and 65% relative humidity. At lower temperatures and higher humidity, drying time increases. Wait for the surface to dry completely before further processing.

6.49 € EUR 5.39 € EUR (-17%)

SKU: 209676

Brand: Eskaro

EAN: 4740381011047

This product is available at Zum.lv - the largest online store in Latvia.

View product on site