Tile Adhesive FK 25kg Grey

Tile Adhesive Sakret FK 25 kg:<ul><li>For wall and floor finishing</li><li>Cement-based</li><li>For ceramic and stone tiles (no larger than 35 x 35 cm)</li><li>For bonding to concrete or other stable mineral surfaces</li><li>Waterproof and frost-resistant</li></ul>Application:<ul><li>The substrate must be dry and firm, all cracks and voids must be filled</li><li>Clean the substrate of less stable and/or detachable layers</li><li>Particularly dense and/or smooth substrates must be treated with an abrasive material</li><li>Surfaces must be primed with SAKRET UG primer (diluted at a ratio of 1:3)</li><li>Particularly smooth concrete surfaces must be primed with SAKRET QG primer</li><li>Mix SAKRET FK in a clean container with cold water until a homogeneous lump-free mass is obtained</li><li>It is recommended to use a mixer at 600 rpm</li><li>After the maturing time (~3 minutes), mix again</li><li>Apply adhesive to an area that can be tiled within approximately 15 minutes</li><li>Expansion joints must not be filled with tile adhesive</li><li>Do not carry out tiling work in direct sunlight, in draughts, or on wet surfaces</li><li>Technical data refers to a temperature of +20°C and 50% relative humidity. Lower temperature increases, higher temperature decreases the stated values</li><li>During the curing phase, protect the tile adhesive from sun, draughts, frost and excessively high temperatures (>25°C)</li><li>Hardened tile adhesive can only be removed mechanically</li><li>Contains cement, reacts alkaline</li><li>Protect skin and eyes, follow technical instructions. If mortar gets into eyes, rinse with plenty of water and consult a doctor if necessary</li><li>Protect packaging from weather conditions, store on wooden pallets in a cool and dry place, cover torn packaging immediately</li></ul>Technical Data:<ul><li>Open time of applied adhesive ~15 min</li><li>Consumption per m² (with notched trowel size 4 x 4 mm) 1.8 kg</li><li>Consumption per m² (with notched trowel size 6 x 6 mm) 2.7 kg</li><li>Consumption per m² (with notched trowel size 8 x 8 mm) 3.6 kg</li><li>Consumption per m² (with notched trowel size 10 x 10 mm) 4.5 kg</li><li>Complies with standard LVS EN 12004</li><li>Adhesive class according to standard (LVS EN 12004) C1</li><li>Can be partially loaded, walkable after 24 h</li><li>Fire resistance class Euroclass A1 (non-combustible)</li><li>Composition – cement, special inert additives, admixtures and auxiliary materials for improving processing properties</li></ul>
6.29 € EUR 5.69 € EUR (-10%)
SKU: 11398
Brand: Sakret
EAN: 4751006560017

This product is available at Zum.lv - the largest online store in Latvia.

View product on site