Tile Adhesive FFKs Extra Flexible 5kg Fast Setting
Fast-setting tile adhesive with improved properties:<ul><li>Color: grey</li><li>Class C2 FT</li><li>For tiling on plasterboard, old tiles and on waterproofing SAKRET OAD ELASTIC</li><li>For ceramic and stone mass tiles, stone cladding slabs, fireplace cladding tiles, clinker tiles and slabs</li><li>Suitable for use on heated floors</li><li>Ideal for repair work and fast results</li><li>Frost and moisture resistant</li></ul>Surface preparation:<ul><li>The substrate must be dry and firm, all cracks and voids must be filled</li><li>Clean the substrate from less stable and/or detachable layers</li><li>Particularly dense and/or smooth substrates must be scarified</li><li>Surfaces must be primed with primer SAKRET UG (diluted at a ratio of 1:3). Particularly smooth concrete surfaces must be primed with primer SAKRET QG</li></ul>Application:<ul><li>Mix SAKRET FFKs in a clean container with cold water until a homogeneous lump-free mass is obtained</li><li>It is recommended to use a mixer at 600 rpm</li><li>After a maturation time of ~3 min., mix again</li><li>In one pass, apply adhesive to only as large a surface area as can be covered with tiles within 10 min.</li><li>Expansion joints must not be filled with tile adhesive</li><li>Do not carry out tiling work in direct sunlight, in drafts, or on wet surfaces</li><li>Hardened tile adhesive can only be removed mechanically</li></ul>Instructions:<ul><li>Technical data refer to a temperature of +20°C and 50% relative humidity. Lower temperatures increase, higher temperatures decrease the stated values</li><li>During the curing phase, protect tile adhesive from sun, drafts, frost and excessively high temperatures (>25°C)</li><li>Contains cement, reacts alkaline</li><li>Protect skin and eyes, follow technical instructions. If mortar gets into eyes, rinse with large amounts of water; consult a doctor if necessary</li><li>Protect packaging from weather conditions, store on wooden pallets in a cool and dry place, cover torn packaging immediately</li></ul>Technical data:<ul><li>Composition - Cement, special inert additives, admixtures and auxiliary materials for improving processing properties</li><li>Open time of applied adhesive ~ 5 - 10 min.</li><li>Consumption per m²<ul><li>If trowel notch size is 4x4 mm - 1.8 kg</li><li>If trowel notch size is 6x6 mm - 2.6 kg</li><li>If trowel notch size is 8x8 mm - 3.5 kg</li><li>If trowel notch size is 10x10 mm - 4.4 kg</li></ul></li><li>Complies with standard LVS EN 12004</li><li>Can be loaded (walked on) and joints filled after ~ 3 - 4 h</li></ul>
6.69 €
EUR
SKU: 15815
Brand: Sakret
EAN: 4751006561458
- Tile Adhesive FKE 12.5kg Grey
- Tile Adhesive FKE Flexible 5kg Grey
- Tile Adhesive Knauf K4 5kg Extra Flexible
- Tile Adhesive Knauf K4 12kg Extra Flexible
- Tile Adhesive Knauf K2 12kg Flexible
- Tile adhesive mira 3130 superfix extra flexible, white 15 kg
- Tile Adhesive Mira Unifix 3110 25kg Flexible White
- Tile Adhesive Mira Unifix 3110 5kg Elastic White
- Tile Adhesive mira 3100 unifix (C2T) Grey 25 kg
- Tile adhesive mira 3130 superfix extra flexible, white 5 kg
- Tile Adhesive FKE Flexible 25kg Grey
- Tile Adhesive Knauf K2 25kg Flexible
This product is available at Zum.lv - the largest online store in Latvia.
View product on site