Tile Adhesive FFK Extra Flexible 5kg
Tile Adhesive Sakret FFK 5 kg:<ul><li>For ceramic, stoneware, natural stone cladding tiles, fireplace cladding tiles, clinker tiles and slabs</li><li>For tiling on plasterboard, directly onto old tiles, wooden surfaces, heated floors, thermal walls and fireplaces</li><li>For tiling on waterproofing membranes OAD ELASTIC, TCM</li><li>For interior and exterior use</li><li>Frost and moisture resistant</li><li>Operating temperature -25ºC to 80ºC</li></ul>Surface preparation:<ul><li>The substrate must be dry and firm, all cracks and voids must be filled</li><li>Clean the substrate of any weakly bonded and/or detachable layers</li><li>Particularly dense and/or smooth substrates must be scarified</li><li>Surfaces must be primed with SAKRET UG primer (diluted at a ratio of 1:3)</li><li>Particularly smooth concrete surfaces must be primed with SAKRET QG primer</li></ul>Application:<ul><li>Mix SAKRET FFK in a clean container with cold water until a homogeneous lump-free mass is formed</li><li>It is recommended to use a mixer at 600 rpm</li><li>After the maturing time (~3 minutes), mix again</li><li>Apply adhesive over an area that can be covered with tiles within 15 min. in one pass</li><li>Expansion joints must not be filled with tile adhesive</li><li>Do not carry out tiling work in direct sunlight, in a draught, or on wet surfaces</li><li>During the curing phase, protect tile adhesive from sunlight, draughts, frost and excessively high temperatures (>25°C)</li><li>Hardened tile adhesive can only be removed mechanically</li></ul>Technical data:<ul><li>Open time of applied adhesive ~ 20 min</li><li>Consumption per m² (with notched trowel size 4 x 4 mm) 1.8 kg</li><li>Consumption per m² (with notched trowel size 6 x 6 mm) 2.7 kg</li><li>Consumption per m² (with notched trowel size 8 x 8 mm) 3.5 kg</li><li>Consumption per m² (with notched trowel size 10 x 10 mm) 4.5 kg</li><li>Complies with standard LVS EN 12004</li><li>Can be loaded (walked on) and joints filled after ~ 24 h</li><li>Fire safety class Euroclass A1 (non-combustible)</li><li>Composition – cement, special inert additives, admixtures and auxiliary materials for improving processing properties</li></ul>
5.69 € EUR
5.09 € EUR
(-11%)
SKU: 14879
Brand: Sakret
EAN: 4751006560512
- Tile Adhesive FFKs Extra Flexible 5kg Fast Setting
- Tile Adhesive FKE 12.5kg Grey
- Tile Adhesive FKE Flexible 5kg Grey
- Tile Adhesive Knauf K4 5kg Extra Flexible
- Tile Adhesive Knauf K4 12kg Extra Flexible
- Tile Adhesive Knauf K2 12kg Flexible
- Tile adhesive mira 3130 superfix extra flexible, white 15 kg
- Tile Adhesive Mira Unifix 3110 25kg Flexible White
- Tile Adhesive Mira Unifix 3110 5kg Elastic White
- Tile Adhesive mira 3100 unifix (C2T) Grey 25 kg
- Tile adhesive mira 3130 superfix extra flexible, white 5 kg
- Tile Adhesive FKE Flexible 25kg Grey
This product is available at Zum.lv - the largest online store in Latvia.
View product on site