Tile Adhesive FKE Flexible 25kg Grey
Tile Adhesive Sakret FKE 25 kg:<ul><li>Class C2TE</li><li>Colour grey</li><li>For tiling on plasterboard, old tiles, and waterproofing SAKRET OAD ELASTIC</li><li>For ceramic and stoneware tiles, natural stone cladding slabs, clinker tiles</li><li>Suitable for use on heated floors</li><li>Frost-resistant and moisture-resistant</li></ul>Application:<ul><li>The substrate must be dry and solid, all cracks and voids must be filled</li><li>Clean the substrate from less stable and/or detachable layers</li><li>Particularly dense and/or smooth substrates must be roughened</li><li>Surfaces must be primed with primer SAKRET UG (diluted at a ratio of 1:3)</li><li>Particularly smooth concrete surfaces must be primed with primer SAKRET QG</li><li>Mix SAKRET FKE in a clean container with cold water until a homogeneous lump-free mass is formed</li><li>Recommended to use a mixer at 600 rpm</li><li>After the maturing time (~3 minutes), mix again</li><li>Apply adhesive to cover only as large a surface area as can be tiled within 15 min.</li><li>Expansion joints must not be filled with tile adhesive</li><li>Do not carry out tiling work in direct sunlight, in a draught, or on wet surfaces</li><li>Technical data refers to a temperature of +20°C and 50% relative air humidity. Lower temperature increases, higher temperature decreases the stated values</li><li>During the curing phase, protect tile adhesive from sun, draught, frost and excessively high temperatures (>25°C)</li><li>Hardened tile adhesive can only be removed mechanically</li><li>Contains cement, reacts alkaline</li><li>Protect skin and eyes, follow technical instructions. If mortar gets into eyes, rinse with plenty of water, consult a doctor if necessary</li><li>Protect packaging from weather conditions, store on wooden pallets in a cool and dry place, cover torn packaging immediately</li></ul>Technical Data:<ul><li>Composition - Cement, special inert additives, admixtures and auxiliary materials for improving processing properties</li><li>Open time of applied adhesive ~ 20 min.</li><li>Consumption per m²<ul><li>If trowel notch size is 4 x 4 mm - 1.6 kg</li><li>If trowel notch size is 6 x 6 mm - 2.4 kg</li><li>If trowel notch size is 8 x 8 mm - 3.1 kg</li><li>If trowel notch size is 10 x 10 mm - 3.9 kg</li></ul></li><li>Complies with standard LVS EN 12004</li><li>Can be loaded (walked on) and joints filled after ~ 24 h</li><li>Fire safety class A1 (non-combustible)</li></ul>
9.99 € EUR
9.39 € EUR
(-6%)
SKU: 234509
Brand: Sakret
EAN: 4751006560383
- Tile Adhesive Knauf K2 25kg Flexible
- Tile Adhesive Knauf K4 25kg Extra Flexible
- Knauf Perlfix 12kg Plasterboard Adhesive
- Knauf Perlfix 30kg Plasterboard Adhesive
- Tile Adhesive FK 25kg Grey
- Tile Adhesive Tilecol 24A 310ml Ready-to-Use
- Tile Adhesive FFK Extra Flexible 25kg
- Tile Adhesive FFK Extra Flexible 5kg
- Tile Adhesive FFKs Extra Flexible 5kg Fast Setting
- Tile Adhesive FKE 12.5kg Grey
- Tile Adhesive FKE Flexible 5kg Grey
- Tile Adhesive Knauf K4 5kg Extra Flexible
This product is available at Zum.lv - the largest online store in Latvia.
View product on site