Knauf Perlfix 30kg Plasterboard Adhesive
<p>Knauf Perlfix is a mounting adhesive mortar (gypsum with special additives) for dry lining – fixing plasterboard sheets.</p><u>Technical Data:</u><ul><li>Fire reaction class A1, non-combustible</li><li>Consumption approximately 5 kg/m²</li><li>Shelf life 6 months from the date of manufacture</li><li>Packaging 30 kg</li></ul><u>Properties and Application Area:</u><ul><li>Good bonding properties</li><li>Securely fixes plasterboard sheets</li><li>Once the material begins to set, its strength increases rapidly</li><li>Easy to mix</li><li>Paste-like consistency</li><li>Economical</li><li>For interior use</li></ul><u>Instructions for Use:</u><p>The substrate must be dry, clean, dust-free and load-bearing; concrete surfaces must be dry, free of laitance and residues of formwork oil. To improve adhesion on smooth, non-absorbent concrete surfaces, prime with Knauf Betonkontakt. Highly absorbent substrates should be primed with Knauf Stuck-Primer (diluted with water at a ratio of 1:3). For precise positioning of Perlfix dabs, mark the edges of the boards on the wall.</p><p>Add 14–15 l of clean water to Perlfix 30 kg and mix with a slow-speed mixer until a paste-like mass is obtained. Only mix as much material at one time as can be used within 30 minutes!</p><p>If the substrate is uneven, apply Perlfix in dab form at approximately 35 cm intervals. If the substrate is very uneven, level it with 10 cm wide Knauf board strips and Perlfix.</p><p>For composite boards with mineral wool, immediately before installation press a thin layer of Perlfix into the insulation layer at the board bonding points using a trowel.</p><p>Press Knauf boards/composite boards against the substrate at right angles and tap level with a straightening batten. Tapping and levelling of the boards must be completed before the adhesive mortar has begun to set!</p><p>The minimum layer thickness of the Perlfix adhesive dabs after adjusting the boards must be 5 mm.</p>
12.39 € EUR
11.39 € EUR
(-8%)
SKU: 11392
Brand: Knauf
EAN: 4750614000045
- Tile Adhesive FK 25kg Grey
- Tile Adhesive Tilecol 24A 310ml Ready-to-Use
- Tile Adhesive FFK Extra Flexible 25kg
- Tile Adhesive FFK Extra Flexible 5kg
- Tile Adhesive FFKs Extra Flexible 5kg Fast Setting
- Tile Adhesive FKE 12.5kg Grey
- Tile Adhesive FKE Flexible 5kg Grey
- Tile Adhesive Knauf K4 5kg Extra Flexible
- Tile Adhesive Knauf K4 12kg Extra Flexible
- Tile Adhesive Knauf K2 12kg Flexible
- Tile adhesive mira 3130 superfix extra flexible, white 15 kg
- Tile Adhesive Mira Unifix 3110 25kg Flexible White
This product is available at Zum.lv - the largest online store in Latvia.
View product on site