Laka Saunalakk 0.95L Sauna Room Varnish Semi-Matte

<p>Water-based acrylic varnish for treating wooden surfaces (walls, ceilings, skirting boards, doors, window frames, etc.) in wet rooms (saunas, bathrooms, changing rooms, basements, garages, etc.) for interior use. Also suitable for concrete, brick and stone surfaces in wet rooms. Not suitable for treating sauna benches — for this purpose, use SaunaOil sauna oil or Saunavaha Vihta.</p><u>Properties:</u><ul><li>Penetrates wood surface well</li><li>Practically odourless</li><li>Dries quickly</li><li>Does not change the colour of the coated surface</li><li>Does not inhibit the natural breathing of wood</li><li>Resistant to prolonged high heat (up to +110 °C)</li><li>The treated surface is easy to clean and resistant to repeated washing</li><li>Protects the surface from moisture and heat</li><li>Forms a water- and dirt-resistant layer on the surface</li><li>Maximum VOC content in ready-to-use paint &lt;130 g/l</li><li>Sheen level - semi-matte (~20)</li><li>Colour - white, transparent after drying (can be tinted in the Eskarocolor system)</li><li>Coverage 10 - 14 m²/l</li><li>Package volume 0.95 l</li></ul><u>Application:</u><p>The moisture content of the wood to be treated must not exceed 20%. The surface must be thoroughly cleaned of old peeling material, wax, grease, oil, dust and other dirt. Remove old peeling varnish from previously varnished surfaces. Sand glossy surfaces to a matte finish. Carefully remove sanding dust. Lightly moisten new wooden surfaces with a stream of water, allow to dry and sand any raised wood fibres. Remove sanding dust.</p><p>Stir the product thoroughly before use. Apply to the surface in 2 coats (in steam rooms – 1 coat) at a temperature of +10 to +30 ºC and relative humidity below 80%. Apply to the surface with a brush or varnish roller along the wood grain, covering the surface and joints along their entire length. The second coat can be applied after allowing the first coat to dry for 2 - 3 hours. Before applying the second coat, we recommend lightly sanding the surface. Carefully remove sanding dust. If necessary, the product can be diluted with water by up to 5%. Before using the sauna for the first time, heat it up and ventilate it.</p><p>Drying time - 0.5 hours, recoating after 2 - 3 hours at +20 ºC and 50% relative humidity. At lower temperatures and higher humidity, drying time increases. The treated surface achieves wear resistance after 4 weeks. For cleaning the surface, use water and, if necessary, neutral or mildly alkaline (pH below 9) cleaning agents. Do not use organic solvents, abrasive cleaning agents, or rough sponges or brushes.</p><p>Work tools - brush, varnish roller. Remove excess varnish from the tool and wash it immediately after use with soap and water.</p>

6.99 € EUR

SKU: 209690

Brand: Eskaro

EAN: 4740381008399

This product is available at Zum.lv - the largest online store in Latvia.

View product on site