Primer for Plastering Knauf Betokontakt 1kg

<p>Betokontakt is a ready-to-use bonding primer for dense, smooth and non-absorbent wall and ceiling surfaces before gypsum plasters, gypsum and lime plasters, bonding of gypsum board panels and tiling. It is ideally suited for monolithic concrete or reinforced concrete ceiling slabs.</p> <p>The primer is vapour permeable, solvent-free, practically odourless and has very low emissions, making it environmentally friendly and safe for people.</p> <p>The primer is applied by hand or with a machine.</p><p>Betokontakt primer is used for interior work on dense, smooth and non-absorbent wall and ceiling surfaces.</p> <p>It is applied before gypsum plasters (e.g. MP75, MP75 L, Rotband), gypsum-lime plasters and also before bonding gypsum board panels or tiling.</p> <p>Knauf Betokontakt is ideally suited for monolithic concrete or reinforced concrete ceiling slabs.</p> <u>Technical Data:</u><ul> <li>Material consumption 250 - 300 g/m²</li> <li>Creates a rough surface with good adhesion</li> <li>Drying time ~ 12 h</li> <li>Heat resistance (after drying) -20°C to +80°C</li> <li>Shelf life 18 months from the date of manufacture</li> <li>Vapour and air permeable</li> <li>For application by hand or machine</li> <li>Does not contain solvents and is environmentally friendly, tested to Emicode EC1PLUS</li><li>Packaging 1 kg</li> </ul><u>Instructions for Use:</u><p>The substrate must have sufficient load-bearing capacity, be dry, firm and sufficiently stable against deformation; free from dust, loose particles, oil, grease, residues of mould release agents and processing agents, sintered layers, and dirt. Before use, Betokontakt must always be thoroughly mixed. It is applied undiluted, spread evenly by hand using a short-pile sheepskin roller, or sprayed mechanically with a suitable PFT feed pump, e.g. Swing, and then rolled out with a sheepskin roller to fully cover the surface. Only when applying mechanically, a small amount of water may be added (maximum 1 l of water per 20 kg of Knauf Betokontakt) to achieve a consistency suitable for spraying. The temperature of the material, substrate and air during application and until the primer is fully dry must be above +5°C. High substrate and air temperatures reduce the working time. During application, avoid draughts and direct sunlight.</p>

6.19 € EUR 5.75 € EUR (-7%)

SKU: 18325

Brand: Knauf

EAN: 4006379073320

This product is available at Zum.lv - the largest online store in Latvia.

View product on site