Primer Start 1L

<p>Water-based primer designed for priming absorbent and non-absorbent interior surfaces to improve adhesion before surface leveling. For non-absorbent surfaces before leveling, we recommend using Kiilt Fix Primer. The primer has good moisture resistance and creates a strong bond between the applied material and the substrate. Cement alkalinity does not reduce the effectiveness of the primer. Cannot be used as an additive in floor leveling compounds.</p><u>Technical Data:</u><ul><li>Density / specific gravity 1</li><li>Color - pink</li><li>Substrate moisture - concrete < 90% relative humidity</li><li>Consumption - diluted primer 1:4 approximately 30 m² / 5 l of mixture, undiluted primer on non-absorbent surfaces approximately 10 m²/l</li><li>Freezable</li><li>Optimal application temperature +18 to +20 °C, minimum +10 °C</li></ul><u>Mixing Ratio:</u><ul><li>Concrete, cement-based floor leveling compounds - diluted 1:4 with water</li><li>Floors with old adhesive residues (e.g. synthetic resins or bitumen) - undiluted</li><li>Surfaces that are not moisture-resistant, such as gypsum or wooden surfaces - undiluted</li><li>Construction boards, e.g. chipboard, plasterboard, etc. - undiluted</li><li>Non-absorbent surfaces, e.g. painted surfaces, tiles - undiluted</li></ul><u>Instructions for Use:</u><p>Clean the surface of cement laitance, dust, dirt and grease. If necessary, mechanically sand the floor. Apply the primer in a thin, even layer on the surface using, for example, a roller, brush or spatula. Avoid the formation of puddles. Concrete and leveled surfaces can be further leveled immediately after priming. When leveling construction boards, non-absorbent surfaces or surfaces with old adhesive residues, allow the primer to dry for approximately 2 hours before further processing. The drying process is significantly affected by environmental conditions such as room temperature, substrate structure and moisture. Therefore, the data provided in our recommendations should be considered as basic information only. Leveling must be carried out no later than 24 hours after priming.</p>

6.19 € EUR

SKU: 107340

Brand: Kiilto

EAN: 6411513702017

This product is available at Zum.lv - the largest online store in Latvia.

View product on site