Waterproofing Mastic Mira 4400 Multicoat 6 kg

<p>Highly flexible waterproofing paste with excellent technical properties for water vapor resistance and crack bridging. For use in wet areas such as bathrooms and toilet rooms. Use 4400 multicoat as a waterproofing membrane for various floor and wall substrates, as well as to cover and embed sealband, safecoat reinforcement tape at wall/floor joints, wall panel joints, and pipe collar outlets.</p><u>Properties:</u><ul><li>Good adhesion</li><li>Does not contain fibers that reduce the water vapor barrier</li><li>Single-component paste</li><li>Easy to apply</li><li>Crack-resistant</li><li>Average consumption 1 kg/m²</li><li>Application temperature +10 to +25°C</li><li>Drying time before applying 2nd coat: 1 - 2 h</li><li>Ready for tiling after 6 - 12 h</li><li>Packaging 6 kg</li></ul><u>Application:</u><p>The waterproofing mastic can be used on concrete, lightweight concrete, water-impermeable surfaces (XPS), bricks, plasters, gypsum/wood panels, and gypsum blocks. The waterproofing membrane can be applied to relatively fresh concrete. The surface must be stable and free of loose particles. Clean from dust, oil, grease, paint, adhesive residues, etc. The surface must be dry. Absorbent surfaces must be primed with 4180 primer before application.</p><p>4400 multicoat is generally not mixed. 4400 multicoat is thixotropic and may lose its consistency when stirred. If it is necessary to mix the mass, it should be done with slow movements and the mass should then be allowed to rest before application until normal consistency is achieved. Vigorous mixing risks introducing air bubbles into the mixture, which can create small holes in the finished membrane.</p><p>Apply 4400 multicoat evenly onto surfaces with a brush, roller, or spatula. Embed the collars and safecoat strips into the fresh 4400 multicoat membrane and, once the first coat has dried (after 1 – 2 h), apply the next coat perpendicular to the first. Ensure that sufficient material is used — too little material will create holes in the membrane. A multi-coat application is applied to completely fill and cover (safecoat ensures a uniform membrane thickness and faster curing). Recommended for floor surfaces on a wood base. Additional surface finishing can be applied after 6 – 12 h at an average air temperature of 18°C.</p>

34.79 € EUR

SKU: 206061

Brand: mira

EAN: 5701914440061

This product is available at Zum.lv - the largest online store in Latvia.

View product on site