Laka Saunalakk 2.4L Sauna Room Varnish Semi-Matte

<p>Water-based acrylic varnish for treating wooden surfaces (walls, ceilings, mouldings, doors, window frames, etc.) in wet rooms (saunas, bathrooms, changing rooms, basements, garages, etc.) for interior use. Also suitable for concrete, brick and stone surfaces in wet rooms. Not suitable for treating sauna benches — for this purpose use SaunaOil sauna oil or Saunavaha Vihta.</p><u>Properties:</u><ul><li>Penetrates well into the wood surface</li><li>Practically odourless</li><li>Dries quickly</li><li>Does not change the colour of the treated surface</li><li>Does not inhibit the natural breathing of the wood</li><li>Resistant to prolonged high heat (up to +110 °C)</li><li>The treated surface is easy to clean and resistant to repeated washing</li><li>Protects the surface from moisture and heat</li><li>Forms a water- and dirt-resistant layer on the surface</li><li>Maximum VOC content in ready-to-use paint &lt;130 g/l</li><li>Sheen level - semi-matte (~20)</li><li>Colour - white, transparent after drying (tintable in the Eskarocolor system)</li><li>Coverage 10 - 14 m²/l</li><li>Package volume 2.4 l</li></ul><u>Application:</u><p>The moisture content of the wood to be treated must not exceed 20%. The surface must be thoroughly cleaned of old loose material, wax, grease, oil, dust and other contaminants. Remove old peeling varnish from previously varnished surfaces. Sand glossy surfaces to a matte finish. Carefully remove sanding dust. Lightly moisten new wood surfaces with a stream of water, allow to dry and sand down any raised wood fibres. Remove sanding dust.</p><p>Stir the product thoroughly before use. Apply to the surface in 2 coats (in steam rooms – 1 coat) at a temperature of +10 to +30 ºС and relative humidity below 80%. Apply to the surface with a brush or paint roller along the wood grain, covering the surface and joints along their entire length. The second coat can be applied after allowing the first coat to dry for 2 - 3 hours. Before applying the second coat, we recommend lightly sanding the surface. Carefully remove sanding dust. If necessary, the product can be thinned with water by up to 5%. Before the first use of the sauna, heat it up and ventilate it.</p><p>Drying time - 0.5 hours, recoatable after 2 - 3 hours at +20 ºС and 50% relative humidity. At lower temperatures and higher humidity, drying time increases. The treated surface achieves wear resistance after 4 weeks. Use water and, if necessary, neutral or mildly alkaline (pH below 9) cleaning agents to wash the surface. Do not use organic solvents, abrasive cleaning agents, or rough sponges or brushes.</p><p>Application tools - brush, paint roller. Remove excess varnish from the tool and wash it immediately after use with soap and water.</p>

19.89 € EUR

SKU: 209675

Brand: Eskaro

EAN: 4740381008405

This product is available at Zum.lv - the largest online store in Latvia.

View product on site